Home

 

Users area

 

Recommendations

 

Video guides

 

Faq

 

 

 

 

Dealers area

 

Installers area

 

 

 

 

 

 

 

 

 

 

 

Video guides

 As a first step towards obtaining maximum efficiency from your Tatano boiler,
follow the advice on the corresponding page (click here)

 

List of videos on user settings:

  1. Appliance version display

  2. Enabling/Disabling burner mode  

  3. Adjusting the boiler temperature

  4. Selecting fuel mixture mode (according to fuel used)

  5. Increasing/Decreasing the amount of air for combustion

  6. Fuel auger adjustment (adjusting the amount of fuel inside the fire box)

  7. Auger adjustment 2 (for Series BK articulated models)

  8. Pump operating temperature

  9. Desired water temperature

  10. Pause time in auto maintenance

  11. Automatic or manual mode

     

List of general videos:


 

IMPORTANT:

 

To obtain good combustion it is necessary to pay particular attention to two factors:

  1. Level of the fuel, controlled by the running time of the fuel auger

  2. Adjusting the amount of air during normal operation, controlled by the combustion fan


Fuel level:

 

During normal operation, the level of fuel in the fire box is very important

For how to adjust the fuel in the fire box, see the video guide  "Fuel auger adjustment (adjusting the amount of fuel inside the fire box)"

 

Example photo showing optimum level of fuel during the normal operation:

 

 


 

Example photo of a burner supplied with too much fuel. In this case reduce the running time of the fuel conveyor as explained in the video guide   "Fuel auger adjustment (adjusting the amount of fuel inside the fire box)"

 

 

 

Example photo of an underfed fire box. In this case it is necessary to increase the running time of the fuel conveyor as explained in the video guide  "Fuel auger adjustment (adjusting the amount of fuel inside the fire box)"

 

 


Adjusting the amount of air during normal operation, controlled by the combustion fan.

 

Optimum flame during normal operation

 

It is not necessary to modify any regulation of air

 

 

 

Flame underfed during normal operation.


The amount of air must be increased.

 

 

 

Flame overfed during normal operation.

It is necessary to reduce the amount of air